|
| |
Reverse Osmosis
Industrial
Pure Water
HS-Thin Film Composite Ultra Low
Pressure Element Specifications
Model |
Flow Rate
GPD
(M3/D) |
Average
Rejection
(%) |
Surface
Area
(ft2) |
Dimension
(in) |
| A |
B |
C |
HS-TW-2540FF* |
700(2.65) |
98.2 |
27 |
40 |
2.38 |
0.750 |
HS-TW-4040FF* |
2,200(8.33) |
98.2 |
85 |
40 |
3.88 |
0.750 |
HS-TW-4040F |
2,350(8.82) |
98.2 |
90 |
40 |
3.88 |
0.625 |
HS-TW-8040F |
10,500(39.21) |
98.2 |
400 |
40 |
7.88 |
1.125 |
Performance is based on 500 ppm NaCl solution
at 100 psig net driving pressure, 77°F (25 °C) and15% recovery. Individual element
performance may vary up to 15%.
Operating Parameters:
|
Temperature: |
Maximum 50
°C |
|
pH: |
2-11 (CIP:
1-11.5) |
|
Pressure: |
Maximum 400
psig |
|
Free chlorine: |
Maximum
<0.l ppm |
|
Silt density index: |
Maximum 5 |
|
Differential pressure: |
Maximum 15
psig per element not
to exceed 50 psig per housing. |
*Stinger design
Rejection Characteristics
Ions |
Feed Analysis (ppm) |
Rejection (%) |
Sodium, Na+ |
100 |
98.0 |
Potassium, K+ |
10 |
97.5 |
Calcium, Ca+2 |
50 |
98.5 |
Magnesium, Mg+2 |
10 |
98.7 |
Chloride, Cl- |
180 |
99.0 |
Alkalinity, HCO3- |
100 |
97.8 |
Sulfate, SO4-2 |
50 |
99.2 |
Nitrate, NO3- |
2 |
97.2 |
Silica, SiO2 |
1 |
97.0 |
TDS |
~500 |
98.2 |
Performance is based on
fouling free tap water at 100 psig net driving pressure, 77°F (25 °C), pH 7.8 and 15%
recovery. Individual element performance may vary up to 15%.
Performance Characteristics
|
HYDROSEP INC.
