logo.gif (2430 bytes)  HYDROSEP INC.

HS-NW HS-BW HS-TW HS-M1 HS-M3 HS-SW1 HS-SW2

seahawk.gif (6900 bytes)

　

                                                 Nanofiltration

                                                       Industrial

                                                       Pure Water

　

HS-Thin Film Composite Nanofiltration Element Specifications

Model Flow Rate
GPD
(M3/D)		 Average
Rejection
(%)		 Surface
Area
(ft2)		 Dimension
(in)
A B C
HS-NW-2540FF* 780(2.95) 98 27 40 2.38 0.750
HS-NW-4040FF* 2,450(9.28) 98 85 40 3.88 0.750
HS-NW-4040F 2,600(9.83) 98 90 40 3.88 0.625
HS-NW-8040F 10,100(38.18) 98 350 40 7.88 1.125

     Performance is based on 2,000 ppm MgSO4 solution at 100 psig net driving pressure, 77°F (25°C) and 10% recovery. Individual element performance may vary up to 20%.

　

a-1.gif (38979 bytes)

　

　

Operating Parameters:

                 Temperature: Maximum 50 °C
                 pH: 3-9 (CIP: 2-11.5)  
                 Pressure: Maximum 400 psig
                 Free chlorine: Maximum <0.l ppm
                 Silt density index: Maximum 5
                 Differential pressure: Maximum 15 psig per element not to exceed 50 psig per housing.

*Stinger design

　

　

Home Up Feedback Site map 

This site is best viewed with Internet Explorer & Netscape Navigator 800X600 pixel.
Send mail to hydrosep@hydrosep.com with questions or comments about this web site.
Copyright © 2000 Hydrosep Inc.
Last modified: 2001/06/30