logo.gif (2430 bytes)  HYDROSEP INC.

HS-BP HS-NP1 HS-NP2 HS-NPN HS-PN HS-UF1

seahawk.gif (6900 bytes)

  

              Reverse Osmosis

                                            Process

                                   Non-charged

       
     HS-Process non-charged reverse osmosis  membranes         

Model

Flow Rate
GPD
(M3/D)

Average
Rejection
(%) 

Surface
Area
(ft2)

Dimension
(in)
A B C

HS-NP-4040FF*

 2,000 7.6 99.5 90

40

 4.0 0.75

HS-NP-4040FE

 1,400 5.3 99.5 63

40

 4.0 0.75

HS-NP-8040F

 9,000 34.0 99.5 350 80 7.9 1.50

HS-NP-8040FE

 6,500 24.7 99.5 275 80 7.9 1.50

    Performance is based on 2,000 ppm NaCl solution at 200 psi net driving pressure, 77° F (25 ° C) pH 8 and 15 % recovery. Individual element performance may vary up to 15 %.　

　

a-1.gif (38979 bytes)

　

Operating Parameters:

Temperature: Maximum 45 °C
Pressure: Maximum 400 psig
Recommend: 100-200 psi
Free chlorine: <0.1ppm
Silt density index: <5.0 (15minutes)
pH range: 4-11 continuous, 2-12 for cleaning

                     *Stinger design

　

　         1700 E. Garry Ave., Ste. #222, Santa Ana, CA 92705˙(949)252-8869˙Fax(949)252-1869˙www.hydrosep.com

                                   

Home Up Feedback Site map 

This site is best viewed with Internet Explorer & Netscape Navigator 800X600 pixel.
Send mail to hydrosep@hydrosep.com with questions or comments about this web site.
Copyright © 2000 Hydrosep Inc.
Last modified: 2001/06/30