HS-t

                                                Ultrafiltration

                                                       Industrial

                                                       Process

　

HS-Thin Film Composite Ultrafiltration Element Specifications

Membrane	Molecular Weight Cut-off	Element Sizes	Flow Rate GPD	Flow Rate Specifications
HS-T1	1,000	2540	540	Fouling free water,400 psig net pressure,25℃,10%recovery
		4040	2,000
		8040	6,225
HS-T2	2,500	2540	540	Fouling free water,150 psig net pressure,25℃,10%recovery
		4040	1,800
		8040	6,800
HS-T3	3,500	2540	540	Fouling free water,75 psig net pressure,25℃,10% recovery
		4040	1,500
		8040	5,600
HS-T8	8,000	2540	540	Fouling free water,40 psig net pressure,25℃,10 % recovery
		4040	1,800
		8040	6,200
HS-TA	10,000	2540	756	Fouling free water,40 psig net pressure, 25℃, 10% recovery
		4040	2,520
		8040	8,680

　

Operating Parameters:

                    Temperature:
Maximum 50 °C

                    pH:
2-11 (CIP: 2-11.5)

                    Pressure:
Maximum 400 psig

                    Free chlorine:
Maximum 10-1,000 ppm-days based on model.

                    Differential pressure:
Maximum 15 psig per element not to exceed 50 psig per housing.

　

Model
Dimension(in)

A B C

HS-T*-2540 40 2.38 0.750

HS-T*-4040 40 3.88 0.625

HS-T*-8040 40 7.88 1.187

　

　

Note: 2540 is stinger design

　

　